The Panigale family represents the ultimate expression of Ducati’s sporting DNA. Whether twin-cylinder like the Panigale V2 or with a MotoGP-derived engine like the Panigale V4, these bikes are born to race on the track, and with Ducati Performance accessories, they can express their full potential.
Ducati Performance offers a wide range of accessories for both bikes, enhancing their racing credentials and improving performance with solutions specifically designed for the track.
Panigale V4: even more powerful and lighter
A complete titanium exhaust (96482351BA), not homologated for road use, with dual exits under the tailgate is designed for those who want to unleash the maximum performance of the Panigale V4 on the track. Born from the collaboration between Akrapovič and Ducati, it instantly enhances the bike’s racing look and boosts the already benchmark performance of the Desmosedici Stradale. Power increases by 12 HP and torque by 7 Nm, for a total of 228 HP and 127.8 Nm. At the same time, the overall weight is reduced by 6.6 kg, benefitting handling through the corners and time attacks. To achieve this level of performance, the exhaust comes with a racing-derived polyester air filter. A dedicated engine mapping, which includes recalibration of the riding aids, also adapts the on-board electronics to the new and even higher performance.
The STM EVO-SBK dry clutch (96080032AA) is another element designed to increase performance. Made from billet aluminium, it has a more effective slipper function, also improving the smoothness of the ride in all off-throttle phases. All this with the pleasant side effect of its iconic sound, which can be fully heard by installing the corresponding open carbon fibre cover (96981251AA), designed to maximize ventilation for track use and not homologated for road use.
Ducati Performance offers numerous other accessories for the Panigale V4, giving it a more aggressive look while simultaneously reducing weight. They range from an alternator cover guard (96914451AA) to front (96981841AA) and rear (96914441AA) mudguards; from heel guards (96981851AA) to a fuel tank cover (96981821AA); and even winglets (96981831AA) and cooling ducts for the front brake calipers (96981471AA).
A larger windshield (97111741AA) is designed to maximize aerodynamic penetration on the track, but is also useful on the road, increasing comfort on longer journeys at highway speeds. Likewise, the fork (97382021AB) and swingarm (97382151AB) sliders, fuel tank cap (97780051BA), and brake (96180761AA) and clutch (96180771AA) levers enhance protection and aesthetics in any context. Finally, to complete the racing look, a safety-focused component like the front brake lever guard (96180521A) is a must. The aesthetic impact of all these accessories is guaranteed by their development in collaboration with Rizoma and their craftsmanship in refined billet anodized aluminium.
Panigale V2: a “track-ready” package
Even on the Panigale V2, the complete, non-homologated exhaust system is undoubtedly the most relevant accessory when it comes to track use. This is a titanium Termignoni unit (96482461AA), with a dual exhaust under the tailpipe like the standard configuration, but in this case consisting of two black-finished mufflers with a carbon fibre end cap. In addition to a weight saving of 4.5 kg, its greatest impact is on engine performance, which is significantly improved: +4.5 Nm and +5.5 HP. The exhaust must be paired with the compatible right-hand lower fairing (97181391AA), designed to maintain the bike’s clean lines even in this configuration.
To maximize the Panigale V2’s on-track capabilities and customize the riding position to your needs, you can install adjustable footpegs (96282121AA) and sporty clip-on handlebars (96282141AA). The former, developed by Ducati Corse and Rizoma, are made of billet anodized aluminium: they stand out both for the possibility of adjustment to multiple positions and for the articulated footrests, rear brake lever and gear lever, designed to minimize the risk of breakage in the event of a slide. The sporty clip-on handlebars, mounted below the upper triple clamp, feature a track-optimized geometry and allow for a more racing riding position.
For maximum control, an adjustable Öhlins steering damper (96282131AA) is also available. Its usefulness however isn’t limited to the track, where speeds and accelerations are extreme: thanks to its adjustable stiffness, this component allows for further refinement of the bike’s stability, especially on less-than-ideal surfaces.
All these accessories can also be purchased as part of the Time Attack package (97981501AA). It includes all the other components needed to complete the transformation of the Panigale V2 in track trim, which can also be purchased individually: covers and plugs for the holes left by the removal of the license plate holder and mirrors (97181301AA and 97382271AA), as well as carbon fibre guards for the clutch and alternator covers (96982031AA and 96982041AA).
Finally, for those seeking an even more radical transformation, a complete set of track fairings (97181421AA) is the ideal solution. A perfect replica of the standard bodywork, unpainted and complete with the connectors needed to disable the headlights. The final racing touch is an oversized windshield (97181411AB), for increased aerodynamic protection in all conditions.
The entire range of accessories is available on Ducati.com, where you can use the “Configurator” section to prepare your Ducati for the track, then share the selected components and packages with your nearest dealer.
For more Ducati news check out our dedicated page Ducati UK News
or head to the official Ducati UK website ducati.com/gb/en/home
* Disclosure: This page may contain affiliate links, which means I may earn a commission (at no cost to you) if you click on the link and make a purchase. Any money made goes straight back into the website and magazine. Your support is appreciated!
Recent Comments