Tag Archives: Workhorse Speed Shop

IndianxWorkhorse Appaloosa v2.0 Shakedown Test At The 2020 Baikal Mile Ice Speed Festival

Indian Motorcycle and Workhorse Speed Shop took on the extreme Baikal Mile Ice Speed Festival last week to give Appaloosa, the highly modified Scout Bobber sprint racer, the toughest of pre-season shakedown tests for its 2020 Sultans of Sprint comeback. From February 25 to March 1, the second running of the Baikal Mile challenged competitors on specially prepared 1/8-mile and 1-mile ice tracks with a variety of specially prepared vehicles alongside stunt riding, drifting, drag racing, flat track and freestyle motocross.

Appaloosa was originally built by Brice Hennebert for the 2019 Sultans of Sprint tarmac series with 500cc Grand Prix legend, Randy Mamola at the controls. With the original build taking over 700 hours, there was little time for testing before the first round in 2019 and so Brice wanted a shakedown test going into the 2020 series.

During his time researching events for a shakedown, Brice came across images and videos of a crazy speed festival, the Baikal Mile, run on the frozen surface of Lake Baikal in Siberia, the oldest and deepest lake in the world.

“I couldn’t believe how amazing this event looked,” says Brice. “For a start, the lake is huge. Over 600km long, 80km wide with more than 20% of the world’s freshwater. It was just so different from anything I am used to, thousands of miles away and with extreme temperatures. On top of that, you have all these people building crazy machines, from mad one-wheel contraptions to luxury vehicles on tank tracks, who come together to share the fun of pushing themselves and their creations to the limit. I just had to be a part of it, and it was amazing to get the go-ahead when I put the idea to Indian Motorcycle.”

With the go-ahead and continued support from top-level partners Akrapovič, Beringer Brakes, Dunlop Europe, Evok3 Performance, Motorex, Öhlins and tuning advice from Flybike, Appaloosa was modified for the extreme Siberian conditions on a tight schedule as it needed to be shipped by the beginning of February to make the long journey to Lake Baikal.

Brice and two of his best friends, Sébastien Lorentz and Dorsan “DJ Peeta Selecta, also had their own epic journey just to reach the event. The first leg saw two flights from Belgium to reach Moscow where the team had an overnight stay before continuing the journey. While in Moscow, the friends decided to get a permanent souvenir of their adventure with a special Tattoo.

“I had been talking with Seb and Dorsan about how this trip was the most insane thing I had done and how I wanted to do something special to remember it,” explained Brice. “That’s where the idea for the tattoo came from. For Seb and Dorsan to also want to get the tattoo shows me that I had chosen the right guys for this trip.”

“I can’t believe that an ordinary guy like me gets to build such a crazy machine and then take it to such an extreme event,” Brice continued. “I had this phrase in my head ‘Good for nothing. Ready for everything’ that summed up this feeling and I decided to get it tattooed on my leg in Russian. Seb joined me with a matching tattoo, while Dorsan had the phrase tattooed in French.”

Freshly tattooed, the team took an overnight flight further east to Ulan Ude before joining other competitors for a 5-hour coach journey to the event’s base in Maksimikha, Republic of Buryatia. Arriving at the event hotel, there was no time to rest with competitor registrations and briefings before Appaloosa had to be unpacked from its special flight cases and re-assembled ready for technical inspection in the morning.

The team’s paddock garage for the week was a canvas and cloth tent with a wood-burning stove inside. With temperatures often dipping well below -25C, the stove was essential to keep Appaloosa and the team warm enough to work and operate. Sharing the tent with the Workhorse team were two Russian vehicles and their teams, a tiny home-built bike with a lawnmower engine and a classic Ural.

Brice commented, “They didn’t speak any English, we didn’t speak any Russian, but as with all car and motorcycle enthusiasts, it was a really friendly atmosphere. Through hand gestures and pointing, we were able to communicate, help each other out and lend each other tools. That’s what I love about events like this, we’re all here for the same reason and we all want to share the fun and make sure everyone has a good time.”

Technical inspections completed, Appaloosa and Sébastien Lorentz were given the all-clear to try their first test run on the 1/8-mile course, a final qualification step for the organisers to be sure the rider is in control and safe, before being allowed to run at speed on the Baikal ice.

“The first run was good, I was just looking to test the traction of the studded tyre that Dorsan had built, to see how stable the bike was, and of course, to make sure I could stop,” said Sébastien Lorentz. “Appaloosa pulled really well, and the front tyre was not being pulled by the uneven surface. With good control, traction and stability, it has given me the confidence to go harder in the next run.”

With another quicker run on the 1/8-mile, Brice and Seb agreed it was time to test on the one-mile course. Although a standard race distance for speed runs, there is a specific reason for this distance at the Baikal Mile festival; Lake Baikal is the deepest lake in the world with a maximum depth of one mile.

The first run on the full mile revealed surprises that the team were not expecting, particularly that the ice was much bumpier than the short 1/8 mile. The front and rear suspension compressed enough to bring the tyre studs into contact with the fins of the real tail unit and a front fairing cross member, requiring some modification to the bodywork to allow for clearance. Limiting the top speed of the bike was an unknown electrical issue at higher speeds in the top gears.

“We knew we’d be facing issues we couldn’t really predict as we have no experience of racing on ice,” commented Brice. “I’ve spoken to teams here who have run perfectly at Bonneville and then the first time they came to Baikal, their machines just wouldn’t work properly due to the extreme conditions.”

“With just that one run, we have learnt so much about ice speed racing. With that experience and the helpful advice and suggestions from the teams around us, we’ll make some changes before tackling the mile again. On the electrical issue, I’ll initially remove the quick-shifter and Power Commander, hopefully that will resolve it. We’ll increase the rear tyre pressure from 2kPa to 3kPa, and Dorsan is also going to prepare a new rear tyre with fewer studs for less weight.”

A second run on the ice mile saw improvements from the changes in tyre pressure and the new stud pattern, but the electrical issue persisted.

“Right now, I think this is simply down to the extremely low air temperature. We are using a race ECU and maps that were not designed for -20C. For the final day of racing, I’m going to reset the ECU and make some tweaks to see if I can improve things. But, with the limited shipping space, I just don’t have the spares or tools to fully diagnose the problem here at the ice.”

On the final day of racing, teams woke up to the best conditions of the week with blue sky and bright sunshine. Heading to the start line for their first run of the day, Brice and Seb had decided that this would be the main pull and they would use the NOS system for the first time in the hope that the changes that Brice had made in the morning had resolved the electrical issue.

A clean start saw Appaloosa accelerate cleanly down the mile before the electrical issue limited their top speed. The run saw their best result yet with a top recorded speed of 180kmh, just short of the 200kmh target that Seb and Brice had set for themselves. With one final run to enjoy the experience of having come so far to do something so extreme, the team reflected on their experience.

Brice said, “Racing on ice is hard, this is the most incredible thing I’ve tried to do. I’ve learnt so much and had a hell of a lot of fun doing it. We’re losing something like 30% of our speed to the conditions and although we’ve had some issues, I am so glad we came here to test Appaloosa. My mind is racing with the possibilities and changes I’d like to make. Thank you to the organisers of the Baikal Mile and everyone here who has made us feel so welcome and part of their ice racing family. Coming here was a huge adventure for all of us and it was all about challenging ourselves, making new friends and having fun at the same time.”

Sébastien commented, “Appaloosa is clearly capable of so much more, and I know that Brice will be using this experience to attack the 2020 Sultans of Sprint as hard as possible. We’ve been welcomed with open arms by all the people here who share our passion for adventure, fun and machines that go fast or just make people smile.”

Ticking another ‘first’ off their lists, Brice and Sébastien joined Dorsan “DJ Peeta Selecta” on the decks to provide the music during at the closing party held on the ice.

Subscribe to the official Indian Motorcycle – Europe, Middle East and Africa YouTube channel to see the full story, video coming soon youtube.com/IndianMotorcycleEMEA

Appaloosa in action from the Baikal Mile and the 2020 Sultans of Sprint series can be followed across Indian Motorcycle social channels with the hashtag #IndianxWorkhorse.

The IndianxWorkhorse Appaloosa will be in action on June 14 at the first round of the 2020 Sultans of Sprint series during Wheels & Waves, Biarritz. The Sultans of Sprint series is in a class of its own with fast and stylish motorcycles competing for rankings based, not only on race results but also rewards for the contender’s creativity and craziness. The challenge gathers the best bike builders from the new custom bike scene in Europe. More information on the 2020 Sultans of Sprint series can be found at sultansofsprint.com

More information on the 2020 Baikal Mile Ice Speed Festival can be found at baikalmile.com

IndianxWorkhorse Appaloosa v2.0 Revealed at Baikal Mile

Indian Motorcycle and Workhorse Speed Shop today revealed the new Appaloosa v2.0 on the frozen surface of Lake Baikal where it will make its 2020 racing comeback and its ice racing debut.

Having travelled thousands of miles to take part in the second running of the Baikal Mile, creator Brice Hennebert said “I can’t believe we are actually here. What an amazing place. I am so pleased to finally reveal the new Appaloosa after weeks of hard work to get here. I can’t wait to see Sebastien blast down the 1-mile strip.”

With Technical Inspections and competitor briefings making up today’s schedule, Appaloosa v2.0 and Sébastien Lorentz get their first chance to race on the ice tomorrow, March 27.

The epic trip to Siberia and the action from Lake Baikal can be followed across Indian Motorcycle social channels with the hashtag #IndianxWorkhorse.

More information on the 2020 Baikal Mile Ice Speed Festival can be found at baikalmile.com

Appaloosa v2.0 to be unleashed at 2020 Baikal Mile Ice Speed Festiva

Indian Motorcycle and Workhorse Speed Shop have announced the comeback of Appaloosa at the 2020 Baikal Mile, an extreme test of rider and machine on the ice surface of Lake Baikal, Siberia. Appaloosa v2.0 will make its 2020 racing debut in Russia, revealing a radical new look, from February 25 to March 1.

The Baikal Mile first took place in March last year and is now set to become an annual fixture on the motorsport calendar. Run on the ice off the eastern shore of Lake Baikal, the festival is one of the most unique international motorsport and racing culture events due to the extreme conditions of Siberia. With specially prepared 1/8-mile and 1-mile ice tracks, teams will be challenging themselves to set speed records on a variety of specially prepared vehicles alongside stunt riding, drifting, drag racing, flat track and freestyle motocross.

Brice Hennebert, creator of Appaloosa, is looking forward to the challenge, “The feeling is crazy, it’s a bit like going racing on the moon. There’s absolutely no reference point, we go to a desert of ice in Siberia where it can be -40°C at night -20°C during the day. I’m super excited and a bit lost at the same time as we have no idea what to expect. With just a few days before the flight, I’m focussing on the practical aspects, but I know this journey will be one of the most insane experiences of my life.”

The Scout Bobber, originally transformed by Brice Hennebert for the 2019 Sultans of Sprint series, has been modified for the challenges of racing on ice and the extreme Siberian conditions with continued support from top-level partners Akrapovič, Beringer Brakes, Dunlop Europe, Evok3 Performance, Motorex, Öhlins and tuning advice from Flybike.

To grab the ice and propel Appaloosa down the strip, the SportSmart Mk3 tyres supplied by Dunlop Europe, have been hand-fitted with hundreds of studs, a task which took Brice’s mechanic, Dorsan, four days of work. To control the cooling of the engine from the extreme temperatures, the “mouth” of the fairing has been closed off with a new carbon fibre nose cap and smaller cooling intakes have been added to the side fairings.

Upgrading the NOS system was a priority for better reliability and power with the original system replaced with a Nitrous Express setup. Öhlins Racing has added a steering damper to the full suspension suite supplied in 2019 to keep Appaloosa stable at the higher speeds targeted. Finally, to protect the pilot and to keep a clear view ahead, areas around the wheels have been closed off inside the fairing to control the ice thrown up by the studded tyres.

With such a departure from its original purpose of tarmac sprints, it was fitting to give Appaloosa v2.0 a full makeover in the form of a new paint scheme designed by Benny Maxwell from Axesent, Japan (IG: @axesent) and expertly applied by Matthias from Moto Peinture (IG: @motopeinture).

For such an extreme challenge, Brice has chosen his teammates carefully. “I’m lucky enough to share this incredible adventure with two of my best friends. Sébastien Lorentz and Dorsan “DJ Peeta Selecta,” he says. “Seb, from Lucky Cat Garage and organiser of the Sultans of Sprint championship, will be piloting Appaloosa. Dorsan, the DJ for Sultans of Sprint, will be helping me with the technical aspects as he will all season. Dorsan will also be keeping the ice party going as DJ for the Baikal Mile Speed Festival.”

Sébastien Lorentz commented, “This will be an extraordinary adventure for us all, what can I say? I feel excited to race on ice for the first time, honoured to ride the IndianxWorkhorse Appaloosa and I can’t wait to see what we can achieve with that beast in such crazy riding conditions. I think we are well prepared, and we’ll all give our best to achieve a great result.”

The completed build and new look will be revealed shortly after the team arrives at Lake Baikal in late February.

The epic trip to Siberia and the action from Lake Baikal can be followed across Indian Motorcycle social channels with the hashtag #IndianxWorkhorse.

More information on the 2020 Baikal Mile Ice Speed Festival can be found at baikalmile.com – Instagram – Facebook

Q&A with Brice Hennebert of Workhorse Speed Shop

With work well under way turning a Scout Bobber into a sprint racer, we caught up with Brice at Workhorse Speed Shop to find out more about him and what inspired his passion for building one-off motorcycles.

Q: You grew up surrounded by your father’s bikes, what is your earliest memory of motorcycles?
A: “I think that was my neighbour in front of my parent’s house trying to start an old off-road 2-stroke for hours and hours, kicking and shouting bad words at it. I think I was 5.”

Q: At what age did you start working on motorcycles and when did you build your first custom?
A: “At the age of 15 years old. My dad gave me a dead Yamaha DT MX50 that had been crashed into a tractor. I did the all engine refurbishing with my dad, finding front forks and wheels on swap meets, etc. In the end, my first moped was sort of customised. Actually, my first true custom was a BMX modified with a sidecar made from an apple box and a Godier Genoud fairing.”

Q: You trained as a graphic designer, were you riding and working on bikes during this time?
A: “At this time, I was living in Brussels, so I only used a bicycle. Then I had a CB750 but nothing really serious. I came back to motorcycles a few years later, about 10 years ago maybe.”

Brice is transforming this Scout Bobber into a full-blooded sprint racer

Q: When did you decide to make your passion your official business?
A: “When the second person arrived to ask for a build. I started to think ‘mmm, maybe I can do this full time’, but it took another 5 years to be able to stop any other side jobs.”

Q: How did the idea come about, was it sudden or had you always wanted to do it?
A: “It was progressive. At first, I discovered, through the work of the Wrench Monkees, that you can do café racers and that kind of build from Japanese rides. In my dad’s and friend’s minds, café racers were European bikes or die. It really had to be old-school British or Italian for them. Then, I built something from my CB750 with a Rickman tank and seat that had been laying in my dad’s workshop for years. When a friend asked me to do something similar, I started thinking ‘hell, this could be the best job on earth’. I decided to fight like a devil for the next 7 years to get to the top-level of builders and I still have many things to learn.”

Q: How does it feel to have returned to the workshop of your childhood as a professional motorcycle builder?
A: “That was a really good feeling, kind of a shelter, far from the city and all the stuff about big cities. For my dad, it was also really cool because my job was born from his passion. The first two years of Workhorse were in that workshop, but now I have moved on to a new place which is better on both the technical side and for the business as Workhorse evolves.”

Q: For you, what makes a really good build? What impresses and inspires you when you see a custom motorcycle?
A: “A sense of proportion, subtle references from all around the motorsport world, efficiency, skilled build process, racing, no plastic, no ‘BS’ and honesty. I’m pushing my own limits every time, so the people I reference are changing all the time and I feed myself from many other areas than just motorcycles.”

Q: What are your favourite tools or equipment in the workshop?
A: “I think that’s the bead roller and my TIG welder for sure.”

Welding the new one-off swingarm for the Indian Scout Bobber

Q: Which biking events are you most looking forward to this year?
A: “For me, the best indication of what’s happening in Europe is the Bike Shed in London, but I will be part of the Reunion in Monza, Wheels & Waves, Cafe Racer festival, Glemseck 101 and few others.”

Q: What is the best memory or experience you’ve had on a motorcycle?
A: “My dad bought 14 Urals with sidecars from Russia and sold 13 of them to friends and family. We took five of them on a long trip through the countryside roads all the way to Corsica. I would have been about 11 years old. Five of us travelled in the sidecars, including my mum and sister and even the dog. Although we spent a lot of time doing repairs, as we had a lot of trouble with the engines breaking down because they were old and tired, it is the very best memory for me.”

Q: Outside of motorcycles, what do you do for fun, what other hobbies do you have?
A: “Cars, fabrication techniques, design, drinking beer and spending quality time with friends in my Village.”

Q: We can’t reveal too much about the Scout Bobber racer you are building yet, but what are you working on right now?
A: “Today I did the swing arm welding; it wasn’t a piece of cake but I’m quite happy with the result. The project is well advanced and, so far, I am fulfilling all my objectives and deadlines in terms of the fabrication. So that’s quite cool.”

Yamaha and Workhorse Speed Shop Set Their Sights on Sultans of Sprint

Custom bike builder extraordinaire Brice Hennebert puts the Workhorse Speed Shop to the task of taking top honours in the Sultans of Sprint Factory class with their custom-built Yamaha XSR700

Yard Built custom bikes are usually made to inspire our customers; to make their XSR900, XSR700, XV950R or SCR950 unique. For this project, Yamaha is breaking the rules. This XSR isn’t a bike built for standing still, this is a bike that Brice built to be a sprint dominator. Low, long and fast as hell, the Workhorse Speed Shop have taken their Yamaha and pulled out all the stops. The engine to the chassis and every point in between has been tweaked, tuned, pulled to pieces and put back together to squeeze every bit of performance from one of custom buildings most versatile models

As a competition bike, there are obvious restrictions laid down about what can be changed and what lines a builder needs to work within. Brice still had room to manoeuvre. The fully handcrafted aluminium body cuts a mean silhouette in classic Yamaha blue and yellow, a tribute to the 1985 FZR 750 Bol d’Or Sonauto ridden by Christian Sarron. The frame has been dropped a full 150mm and the footpegs were shifted back. The custom-built Workhorse swingarm extends an extra 100mm and turns this beast into a low-down dragster.

The XSR700 will have the smallest engine of all the bikes in the Factory Class. But, we start the competition with a strong advantage, a very low weight and impressive torque. The crankshaft has been balanced, the oil circuit modified and the counterweights suppressed. With a Suter antihopping clutch and a modified injection body; this is a whole new powerhouse.

Amongst the high-end parts putting this build into the stratosphere are a carbon battery, a full racing brake system, clutch control, a front and rear master cylinder as well as a NOS system with a Max Extreme Nitrous Controller. The paintjob was supplied by Matthias Van Brussel and the seat and jacket mods are straight from the mind of Jeroen Bauwmeister from Silver Machine.

“What can I say about this bike?” commented Antoine Clémot, Yamaha Motor Europe Motorcycle Product Manager. “It’s fast, it’s low, it’s mean, it’s a lot of fun and we think it’s a winner. Events like the Sultans of Sprint really bring new vibes to the Sport Heritage segment with a subtle mix of fun and performance. We love to see these amazing bikes getting outside of static shows to race full throttle. They’re all about individual expression and making crazy designs and then getting together and sharing them. The Workhorse bike – it’s got that old-school Yamaha feel with the FZR750 Suzuka style body, it has bespoke everything and it just looks really unique. I’m excited to see what it does, but I’m already proud to be a part of the build.”

All that deliciousness is aimed directly at the Sultans of Sprint events running this year. Anyone with petrol in their veins should be aware of Sultans of Sprint but in case you still need to get caught up, here it is. Each year hundreds of like-minded madmen and madwomen get together to race real fast in a straight line. These are events revolving around fine design, speed and above all else, fun! The Sultans of Sprint will be held at The Reunion in Italy from May 19th to the 20th, then Biker’s Classics in Belgium from June 29th to July 1st, Glemseck, Germany from August 29th to September 2nd and finally the Dandy Riders Festival in France from the 23rd to the 24th of September. If you’re lucky enough to attend an event you’ll see some outrageous designs put forward by passionate people.

The Workhorse XSR700 custom dragster will be piloted by a different guest rider for each event, with the first round featuring the legendary Niccolò Canepa, the first Italian rider to win an FIM Endurance World Championship title after lifting the 2016/2017 title in just his second season with the GMT94 Yamaha Official EWC Team. If you want to join the adventure and find out the riders for each of the other rounds, make sure you’re following the team on https://www.facebook.com/YamahaMotorEU/.